
Generator Installation

Whole-House Generator Installation in Maine
Maine storms knock out power when you need it most. Aces Highlands HVAC-Plumbing-Electrical installs whole-house standby generators that switch on automatically — keeping your heat, water, and essentials running through any outage in Greater Portland and Southern Maine.

Our licensed electricians pull permits and arrange inspections when the work requires them.
Call now to schedule generator installation: (207) 670-8616



Whole-House Generator Installation
A standby generator sits permanently outside your home and starts automatically the moment the power goes out — no cords, no manual switching, no cold nights. We install Generac and other leading standby systems sized to cover your whole home or just the circuits that matter most: heating, well pump, refrigeration, sump pump, and lighting.
- Automatic Standby Power
- Whole-Home Coverage
- Professionally Sized & Installed
To schedule generator installation, call (207) 670-8616.
Electrical Services We Provide
More capacity, and replacing older panels with a documented safety history (Federal Pacific, Zinsco).
Dealing with knob-and-tube or aluminum branch circuits, or running new circuits for a remodel.
New circuits, GFCI/AFCI code compliance, tamper-resistant devices.
Recessed, outdoor, and smart lighting, done to the right fixture rating for the location.
A dedicated 240-volt circuit sized under NEC Article 625.
Standby power with a code-compliant automatic transfer switch.
Electrical Repair & Troubleshooting
Flickering lights, warm outlets, nuisance tripping, and everything that falls under "something's not right."
Standby vs. Portable Generator: Which Makes Sense in Maine?
A portable generator is cheaper up front, but it only helps if someone is home to wheel it out, fuel it, and run cords — in the dark, in an ice storm. A standby generator starts itself within seconds of an outage, runs on your propane or natural gas supply, powers circuits through a proper transfer switch, and shuts itself off when the grid returns. For Maine homes, the decisive factor is usually heat: an extended winter outage with no heat risks frozen pipes and thousands in water damage, and a standby unit protects the house whether you are home or not.
If you already own a portable generator, there is a middle path worth knowing about: we can install a manual transfer switch or interlock so your portable unit safely powers selected circuits — no extension cords through windows, and no dangerous backfeeding. As a local company, we will recommend whichever solution actually fits your risk and budget rather than defaulting to the biggest ticket.
How Much Does Generator Installation Cost in Greater Portland?
Capacity, fuel connection, and placement move the price; an essentials-only setup with a smaller unit costs meaningfully less than whole-home coverage, and propane tank placement or gas-line sizing is quoted separately.


How Is a Standby Generator Sized, and What Does It Cost?
Sizing starts with a load assessment: which circuits must stay live in an outage? Essentials-only coverage — heat, well pump, refrigerator, sump pump, some lights — often fits a 10-14 kW unit, while whole-home coverage for a typical house runs 18-26 kW. Nationally, installed standby systems typically land in the $9,000-$15,000 range depending on capacity, fuel connection, and placement; an essentials-only setup costs meaningfully less than whole-home.
Our installation covers the concrete or composite pad, the automatic transfer switch at your electrical panel, the gas or propane fuel connection, permitting, and inspection — performed under our Maine electrical, plumbing, and gas licensing, which matters because a standby generator is one of the few projects that is electrical and fuel work at the same time. Aces Highlands HVAC-Plumbing-Electrical holds both sides of that job in-house.
- Capacity
- Fuel connection
- Placement
- Propane tank placement or gas-line sizing is quoted separately
Call (207) 670-8616 to schedule generator installation.

About Generator Installation
Every installation includes a properly sized generator, an automatic transfer switch wired to your electrical panel, and a fuel connection to natural gas or propane. We handle permitting, placement, and inspection so your system is safe, code-compliant, and ready before the next storm.
We start with a load assessment to recommend the right capacity for your needs and budget — no overspending on a unit larger than you need. We offer financing options on whole-house generators, and we provide ongoing maintenance to keep your backup power ready year-round. Contact us for a free estimate.

When to Call an Electrician Right Away
You should call an electrician right away if you notice:
- Burning smell or scorch marks at the panel or an outlet
- Sparking, buzzing, or crackling from a panel or outlet
- Breakers that trip repeatedly or will not reset
- Partial power loss not caused by the utility
- Exposed, damaged, or overheating wiring
A burning smell, sparking outlet, or hot panel is a fire hazard — stop using the affected circuits and call us immediately.
Standby Generators: Sizing, Transfer Switches & Fault Lights
Maine loses power in a way most of the country doesn't — a January ice storm can mean days, not hours. A standby generator is one of the few electrical projects homeowners research almost as thoroughly as we do, so here's the technical part laid out plainly.
Automatic Transfer Switch: The Part That Actually Matters
The generator itself gets the attention, but the automatic transfer switch (ATS) is what makes it safe and automatic. When utility power drops, the ATS disconnects your house from the grid before it connects the generator — which is what stops your generator from back-feeding power onto utility lines a repair crew might be touching. A generator wired without a proper transfer switch is a genuine hazard to line workers, and it's not legal to install that way.
Once utility power returns, the ATS switches back automatically and shuts the generator down after a brief cool-down run.
Whole-House vs. Partial-House Sizing
A whole-house generator is sized to run everything at once, including central air and an electric range. Most Maine homes don't need that — we size to the loads that actually matter during an outage: the heating system's controls and circulator or blower, the well pump, the refrigerator, some lighting and outlet circuits, and often a sump pump. A managed-load or partial-house unit covering those circuits costs meaningfully less than whole-house and covers what an outage actually threatens: heat, water, and food safety.
Fuel source is part of the sizing conversation too — propane and natural gas units start automatically and run as long as fuel is supplied, while diesel units need to be refueled manually during an extended outage.
The Weekly Exercise Cycle Isn't Optional
Every standby generator runs a short self-test on a schedule you set — typically weekly — cycling the engine for several minutes without transferring the load. This isn't a novelty feature; it's what keeps the oil circulating, the battery charged, and the fuel system from gumming up, so the unit actually starts when you need it during a real outage. We set this schedule during installation and it's worth confirming it's still running after any power blip resets the controller's clock.
Generac Evolution and Sync Controllers
Generac's Evolution and Sync controllers don't make you decode a number — the LCD screen spells the alarm out in plain English, and the unit logs it so it's still there if you missed the moment it happened. These are the ones we see most on service calls.
Kohler (Rehlko) RDC2 and DC Controllers
Kohler's home standby line — sold under the Rehlko name since the company's 2025 rebrand — uses the same plain-language approach on its RDC2 and older DC controllers, with the display distinguishing a warning you can keep running through from a fault that shuts the unit down.
Champion Power Equipment
Champion's standby units use LED status indicators, and on the models with a digital display, a numeric fault code cross-referenced in that model's owner's manual. Champion doesn't publish one universal code list across its whole standby lineup, so we match the exact model before quoting a code's meaning rather than guess from a similar-looking unit.
When a Fault Means Stop, Not Reset
Placement, Clearance, and Permits
Standby generators have manufacturer-specified clearances from windows, doors, and fresh-air intakes — commonly measured in feet, not inches — because exhaust carbon monoxide has to be kept away from anywhere it could enter the house. Local fire and building codes add their own setback and permit requirements on top of the manufacturer's spec. We handle the siting, the concrete or composite pad, the gas or propane hookup, and the electrical permit and inspection together, since all four have to agree with each other.
Sources: Maine Office of Professional Licensing — Electricians


Why Choose Aces Highlands for Generator Installation in Greater Portland
We treat electrical work with the seriousness it deserves — whether it is a single home outlet or a full panel upgrade.
- Every connection is tight
- Every circuit is tested
- Our licensed electricians pull permits and arrange inspections when the work requires them
Safe, clean, and done right.
Generator Installation FAQ

Proudly Serving Greater Portland and Southern Maine
Generator installation services available in:
• Portland • South Portland • Scarborough • Westbrook • Gorham • Falmouth • Cape Elizabeth • Cumberland • Windham • Standish • Gray • New Gloucester • Raymond • North Yarmouth • Yarmouth • Freeport • Pownal • Bridgton • Brunswick • Harpswell
If you don’t see your area listed, call (207) 670-8616 — chances are we can still help.

What Our Customers Are Saying
Trusted by homeowners across the Greater Portland area for quality workmanship, responsive service, and professional care.
Need Generator Installation Today?
Panel upgrades, EV chargers, generators, wiring, and lighting for your home — done safely and to code by a licensed Maine electrician.
Call now to schedule generator installation: (207) 670-8616