Skip to content
24/7 Emergency Service(207) 670-8616
They quickly and efficiently repaired the kitchen faucet that was loose.— Ruth K.Google
Aces Highlands HVAC-Plumbing-Electrical

Outlet & Switch Installation

Outlet & Switch Installation in Greater Portland, ME
A white GFCI outlet with test and reset buttons

Outlet & Switch Installation in Maine

Aces Highlands HVAC-Plumbing-Electrical installs and replaces electrical outlets and switches throughout your home — from adding GFCI protection in kitchens and bathrooms to installing smart switches and USB charging outlets.

Duplex outlets with terminal screws and mounting tabs
Licensed Maine Electrician

Our licensed electricians pull permits and arrange inspections when the work requires them.
Call now to schedule outlet and switch installation: (207) 670-8616

A plug-in GFCI adapter connected to a wall outlet
An older outlet in a metal electrical box on a brick wallAn older outlet in a metal electrical box on a brick wall

Outlet & Switch Installation

Modern homes need more outlets than ever. We install additional outlets where you need them, upgrade existing outlets to GFCI or AFCI protection where code requires, and add USB charging outlets for convenience. If your home needs additional circuits to support new outlets, we also provide wiring and circuit installation services.

  • GFCI & USB Outlets
  • Dimmer Switches
  • Smart Home Ready

To schedule outlet and switch installation, call (207) 670-8616.

Electrical Services We Provide

Panel Upgrades

More capacity, and replacing older panels with a documented safety history (Federal Pacific, Zinsco).

Wiring & Rewiring

Dealing with knob-and-tube or aluminum branch circuits, or running new circuits for a remodel.

Outlet & Switch Installation

New circuits, GFCI/AFCI code compliance, tamper-resistant devices.

Lighting Installation

Recessed, outdoor, and smart lighting, done to the right fixture rating for the location.

EV Charger Installation

A dedicated 240-volt circuit sized under NEC Article 625.

Generator Installation

Standby power with a code-compliant automatic transfer switch.

Electrical Repair & Troubleshooting

Flickering lights, warm outlets, nuisance tripping, and everything that falls under "something's not right."

Where Does Code Require GFCI and AFCI Protection?

GFCI outlets protect against shock by cutting power the instant current leaks to ground — modern code requires them anywhere water and electricity can meet: kitchens, bathrooms, laundry areas, garages, basements, and outdoor receptacles. AFCI protection guards against arc faults, the hidden sparking inside damaged wiring or loose connections that starts fires, and current code calls for it on most living-area circuits. Older homes were built long before these requirements existed, and grandfathered wiring is legal to live with — but every year without protection is risk you do not have to carry.

We add GFCI and AFCI protection at the outlet or at the breaker, whichever fits your wiring and budget best. It is one of the cheapest meaningful safety upgrades in the trade, performed by a Maine-licensed electrician, and we will tell you plainly which locations in your home actually need it — no scare-tactic whole-house pitch.

How Much Does Outlet and Switch Installation Cost in Greater Portland?

Priced per location; replacing a device in an existing box sits at the low end, while a new dedicated circuit, fishing cable through finished walls, and GFCI or AFCI protection move it up.

Green electrical boxes set into a wallGreen electrical boxes set into a wall

What Does Outlet and Switch Installation Cost in Maine?

$150–$350

  • Priced per location
  • Replacing a device in an existing box sits at the low end
  • A new dedicated circuit or fishing cable through finished walls moves it up
  • GFCI or AFCI protection moves it up

Call (207) 670-8616 to schedule outlet and switch installation.

An electrical box between studs above new conduit

About Outlet & Switch Installation

We install dimmer switches, three-way switches, timer switches, and smart switches compatible with popular home automation systems. Every installation is done cleanly with proper wire connections and secure mounting.

If your outlets are old, loose, or showing signs of damage like scorch marks or a burning smell, replacement is a safety priority. We diagnose the issue, replace the outlet or switch, and check the circuit to make sure everything is safe. Pair new switches with updated lighting fixtures for a complete room upgrade.

Wall openings for outlets beside the doorway of a finished room

When to Call an Electrician Right Away

You should call an electrician right away if you notice:

  • Burning smell or scorch marks at the panel or an outlet
  • Sparking, buzzing, or crackling from a panel or outlet
  • Breakers that trip repeatedly or will not reset
  • Partial power loss not caused by the utility
  • Exposed, damaged, or overheating wiring

A burning smell, sparking outlet, or hot panel is a fire hazard — stop using the affected circuits and call us immediately.

Outlets, Switches & Nuisance Tripping: A Homeowner's Guide

Two outlet questions come up more than any others on our service calls: "why does this keep tripping," and "do I need one of the buttons-in-the-middle outlets here." Both have real code-driven answers, not just personal preference.

Which Outlet Warning Signs Should You Take Seriously?

An outlet that is warm to the touch, buzzes, sparks visibly when you plug in, shows scorch marks, or no longer grips a plug firmly is telling you something is wrong behind the wall plate. Loose connections build heat, and heat is how electrical fires start — the fix is usually a fast, inexpensive replacement, but it should not wait. The same goes for switches that crackle or feel hot.

Two-prong outlets throughout a home mean ungrounded circuits. Depending on the wiring behind them, the right fix ranges from GFCI replacements (a code-approved solution for ungrounded outlets) to running new grounded circuits via our wiring services. We check what is actually in the box before recommending anything.

GFCI: Where Maine Code Actually Requires It

A Ground-Fault Circuit Interrupter (GFCI) outlet — the one with TEST and RESET buttons — shuts power off in a fraction of a second if it senses current leaking somewhere it shouldn't, like through a person. Over the last several National Electrical Code cycles, the list of rooms that require it has grown to cover kitchens, bathrooms, garages, unfinished basements, outdoor outlets, and anywhere within six feet of a sink.

A GFCI protects people from shock; it doesn't do anything about a wiring fault starting a fire, which is a different device's job.

AFCI: The One People Have Never Heard Of

An Arc-Fault Circuit Interrupter (AFCI) breaker watches for the electrical signature of arcing — a loose connection, a nicked wire inside a wall, a nail through a cable — and trips before that arc has a chance to start a fire. Since the 2014 National Electrical Code cycle, most living spaces in a new or renovated home require AFCI protection, not just kitchens and baths.

AFCI breakers live in the panel, not on the outlet itself, which is part of why homeowners rarely know they have them until one trips.

Reading a Dual-Function Breaker's Trip Indicator

Combination AFCI/GFCI breakers (standard on most new circuits now, since they cover both protections in one device) are built with a trip-free mechanism: when the internal electronics trip the breaker, the handle stops in a middle position, not simply at OFF. That middle position is the first clue this wasn't a manual switch or an ordinary overload — the handle has to be pushed firmly to OFF before it will reset to ON. Beyond that shared behavior, each panel manufacturer adds its own way of showing which protection tripped.

Square D

Square D's Homeline and QO dual-function breakers use the trip-free middle-handle position described above for either an arc-fault or a ground-fault trip. The breaker's own label spells out the reset procedure — push firmly to OFF, then to ON — since a normal flip won't clear it.

Eaton

Eaton's combination-type breakers (BR and CH series) add a visible trip indicator — a small window on the breaker face — so it's obvious at a glance that the breaker tripped on its own rather than being switched off by hand.

Siemens

Siemens dual-function breakers follow the same trip-free handle convention, and some product lines add a self-test indicator that flags when the breaker's own internal diagnostic — not a live fault on the circuit — is what caused the trip.

Why a GFCI or AFCI Keeps Tripping (Nuisance Tripping)

  • A GFCI tripping repeatedly on the same circuit is often a genuine ground fault — moisture in an outdoor box, a damaged appliance cord, or a fixture with failing insulation — not a faulty outlet.
  • An AFCI that trips when a specific appliance starts (a vacuum, a space heater, an older refrigerator) can be reacting to normal motor arcing that an older or lower-quality AFCI misreads as a fault; a newer combination-type AFCI is usually less prone to this.
  • A GFCI at the start of a circuit protecting several downstream outlets means one bad connection anywhere on that run can trip the whole chain — worth mapping before assuming the visible outlet is the problem.
  • Repeated tripping is information, not an inconvenience to just reset past. We trace it to the actual fault rather than swap the outlet and hope.

Tamper-Resistant Receptacles

Since 2008, the National Electrical Code has required tamper-resistant (TR) receptacles — with spring-loaded shutters over the slots — in nearly every outlet in a dwelling, not just rooms with kids. If your home was built or last rewired before that and you have young children, upgrading standard outlets to TR versions is a straightforward retrofit we can do room by room.

Sources: Maine Office of Professional Licensing — Electricians

The Aces Highlands crew in black uniforms standing in front of an Aces Highlands vanThe Aces Highlands crew in black uniforms standing in front of an Aces Highlands van

Why Choose Aces Highlands for Outlet & Switch Installation in Greater Portland

We treat electrical work with the seriousness it deserves — whether it is a single home outlet or a full panel upgrade.

  • Every connection is tight
  • Every circuit is tested
  • Our licensed electricians pull permits and arrange inspections when the work requires them

Safe, clean, and done right.

Outlet & Switch Installation FAQ

Warmth, buzzing, or sparking usually means a loose or deteriorated connection inside the outlet — a fire risk that gets worse with use. Stop using the outlet and have it replaced promptly. It is typically a quick, inexpensive repair.
Yes. If a ground path exists in the box, a straightforward swap works. If the circuit is ungrounded, code allows GFCI outlets labeled "No Equipment Ground" as a safe replacement, or we can run a properly grounded circuit. We check the wiring first and give you both prices where both apply.
Modern code requires GFCI protection in kitchens, bathrooms, laundry areas, garages, unfinished basements, and outdoors — essentially anywhere near water or ground contact. Older homes are grandfathered, but adding GFCIs in those locations is a low-cost safety upgrade we strongly recommend.
Replacing an existing outlet or switch is typically a modest service call; adding a brand-new outlet where none exists costs more because it involves running cable, nationally often $150-$350 per location depending on access. We quote before we work, and the quote is the price.
Yes. We install customer-supplied smart switches, dimmers, and USB outlets all the time — and we will flag compatibility issues (like dimmers that need a neutral wire your box may not have) before anything goes in the wall.
Aces Highlands crew in front of two Aces Highlands vans

Proudly Serving Greater Portland and Southern Maine

Outlet and switch installation services available in:

• Portland • South Portland • Scarborough • Westbrook • Gorham • Falmouth • Cape Elizabeth • Cumberland • Windham • Standish • Gray • New Gloucester • Raymond • North Yarmouth • Yarmouth • Freeport • Pownal • Bridgton • Brunswick • Harpswell

If you don’t see your area listed, call (207) 670-8616 — chances are we can still help.

Aces Highlands crew in front of two Aces Highlands vans

What Our Customers Are Saying

Trusted by homeowners across the Greater Portland area for quality workmanship, responsive service, and professional care.

Google
4.7
Google rating40 reviews
Write a review
Susan Donegan profile picture
Susan DoneganPosted on Google · July 2026
We have called Samuel for our electrical needs over the last few years and have always been impressed with professional and courteous attitude — installing extra outlets, installing new lights and ceiling fans, our whole house generator, charger for the electric car, even the hot tub!!! His price was fair, and never disappointed when work was completed.
Amanda R profile picture
Amanda RPosted on Google · July 2026
I've had an excellent experience working with them for both electrical and HVAC work as I remodel my 1785 home. I highly recommend them.
Malina Foss profile picture
Malina FossPosted on Google · July 2026
I can not recommend Sam and his team enough!! In a world of slow response times and cut corners they went above and beyond in every area, installing a new electrical panel for me. Their attention to detail and love of their craft truly sets them apart from the rest!
Jacqueline Vogeley profile picture
Jacqueline VogeleyPosted on Google · September 2026
Great experience! Open, honest and efficient Job well done
Ruth Kirkwood profile picture
Ruth KirkwoodPosted on Google · June 2026
This company is excellent. They quickly and efficiently repaired the kitchen faucet that was loose.
Steve Robertson profile picture
Steve RobertsonPosted on Google · June 2026
Where to begin? These guys hooked up a sauna for me and did an amazing job, it was not a small job. Projects big or small, these guys are my go to. Responsive, reasonably priced, and professional. In a world where it is tough to get good service, I'm thrilled to have these guys in my phone.
Ryan Eling profile picture
Ryan ElingPosted on Google
This team was called in by my property management company for where I rent. Elijah and his team were professional, clear speaking. Good communicators gave me the real deal. Didn't give any runaround. I trust them and want to use them for my own projects.
Christian van Loenen profile picture
Christian van LoenenPosted on Google
Beyond impressed with Elijah and his team. Professional, communicative, and do great work. HIGHLY recommend. Thank you, Elijah!
John Walton profile picture
John WaltonPosted on Google
I've had three HVAC issues over the past two years. Each time I call, Elija or the office picks up the phone, and my problem is fixed in 24 hrs. Their solutions always feel correct and honest. I cannot recommend them more.
Adam Ayan profile picture
Adam AyanPosted on Google
Elijah and Highlands Heating & AC were super helpful! Boiler failed over the weekend and Elijah was very responsive and helpful, getting us up and running right away. I would recommend him at HH&AC highly!
Justin Funk profile picture
Justin FunkPosted on Google
We highly recommend Highlands Heating & AC. They are extremely responsive, knowledgeable and do great work. Our boiler stopped working and Elijah was quick to respond after hours on a Friday. He installed a new boiler and heat pump hot water heater.
Nichole A profile picture
Nichole APosted on Google
Highly recommend! Cannot thank them enough for fixing my water heater. Elijah is very reliable and communicative. No hassle, no phone tag, transparent with cost and quick to repair the issue. I know who to call if I need help again!

Need Outlet & Switch Installation Today?

Panel upgrades, EV chargers, generators, wiring, and lighting for your home — done safely and to code by a licensed Maine electrician.

Call now to schedule outlet and switch installation: (207) 670-8616

Go to Top