Skip to content
24/7 Emergency Service(207) 670-8616
They quickly and efficiently repaired the kitchen faucet that was loose.— Ruth K.Google
Aces Highlands HVAC-Plumbing-Electrical

Wiring & Rewiring

Wiring & Rewiring in Greater Portland, ME
Electrical cable running between studs in an unfinished wall

Electrical Wiring & Rewiring in Maine

Whether you need a single new circuit or a complete rewire of an older home, Aces Highlands HVAC-Plumbing-Electrical handles residential wiring with precision and code compliance.

A coil of yellow electrical cable with exposed conductor ends
Licensed Maine Electrician

Our licensed electricians pull permits and arrange inspections when the work requires them.
Call now to schedule wiring or rewiring: (207) 670-8616

A row of electrical boxes set in an unfinished stud wall
Older wiring running beneath exposed wood framingOlder wiring running beneath exposed wood framing

Wiring & Rewiring

Older homes in the Portland area may still have knob-and-tube or aluminum wiring that presents safety risks and insurance issues. We replace outdated wiring with modern copper wiring, properly routed and protected in every wall and ceiling cavity. A rewire often pairs with a panel upgrade for a fully modernized electrical system.

  • New Circuit Installation
  • Whole-Home Rewiring
  • Knob & Tube Replacement

To schedule wiring or rewiring, call (207) 670-8616.

Electrical Services We Provide

Panel Upgrades

More capacity, and replacing older panels with a documented safety history (Federal Pacific, Zinsco).

Wiring & Rewiring

Dealing with knob-and-tube or aluminum branch circuits, or running new circuits for a remodel.

Outlet & Switch Installation

New circuits, GFCI/AFCI code compliance, tamper-resistant devices.

Lighting Installation

Recessed, outdoor, and smart lighting, done to the right fixture rating for the location.

EV Charger Installation

A dedicated 240-volt circuit sized under NEC Article 625.

Generator Installation

Standby power with a code-compliant automatic transfer switch.

Electrical Repair & Troubleshooting

Flickering lights, warm outlets, nuisance tripping, and everything that falls under "something's not right."

Does Your Home Actually Need Rewiring?

Portland and Southern Maine are full of homes built before 1950, and many still carry some original wiring. The clearest cases for rewiring: active knob-and-tube (no ground, brittle insulation, and a problem for insurers), aluminum branch wiring from the 1960s-70s (connections loosen and overheat), and any wiring with cracked or crumbling insulation. Day-to-day symptoms include frequently tripped breakers, warm switch plates, flickering lights, two-prong outlets throughout the house, and a faint burning smell you cannot locate.

Not every old house needs a full rewire, though. Sometimes only certain circuits are original while others were updated in past renovations. We evaluate what is actually behind your walls and quote accordingly — as a local company without franchise sales targets, we have no reason to sell you a whole-home rewire when a partial one solves the problem.

How Much Does Wiring or Rewiring Cost in Greater Portland?

Whole-home rewiring runs roughly $4–$10+ per square foot depending on access, home age, and finish level; a partial rewire of only the original knob-and-tube or cloth-wrapped circuits costs far less.

Yellow and white cables run along the top of a framed wallYellow and white cables run along the top of a framed wall

What Does Wiring or Rewiring Cost in Maine?

$8,000–$20,000

  • Access
  • Home age
  • Finish level
  • A partial rewire of only the original knob-and-tube or cloth-wrapped circuits costs far less

Call (207) 670-8616 to schedule wiring or rewiring.

Two runs of conduit in an open trench beside a building

About Wiring & Rewiring

For renovations and additions, we run new circuits, install junction boxes, and ensure proper wire sizing for the intended load. We also handle plumbing and HVAC work for remodel projects, keeping everything under one roof.

Every wiring job includes proper circuit labeling, secure connections, and thorough testing. We pull permits when required and schedule inspections to ensure full code compliance.

An electrician inspecting the wiring inside an open panel

When to Call an Electrician Right Away

You should call an electrician right away if you notice:

  • Burning smell or scorch marks at the panel or an outlet
  • Sparking, buzzing, or crackling from a panel or outlet
  • Breakers that trip repeatedly or will not reset
  • Partial power loss not caused by the utility
  • Exposed, damaged, or overheating wiring

A burning smell, sparking outlet, or hot panel is a fire hazard — stop using the affected circuits and call us immediately.

Old Wiring, Explained: Knob-and-Tube and Aluminum Branch Circuits

Southern Maine has a lot of housing stock old enough to have gone through several wiring eras, and two of them come up constantly on inspection reports: knob-and-tube and aluminum branch-circuit wiring. Neither one means your house is unsafe today, but both mean something specific, and homeowners deserve the real explanation instead of a scare pitch.

What Does a Rewire Actually Involve?

A rewire replaces the old conductors with modern grounded copper wiring, adds proper GFCI and AFCI protection where code requires, and usually pairs with a panel upgrade so the new circuits land in a panel that can handle them. Contrary to what many homeowners fear, a rewire does not mean gutting your walls — experienced electricians fish new cable through wall cavities, basements, and attics, opening only small, targeted access points that are easy to patch.

We work room by room to keep your home livable during the project, label every circuit clearly, and finish with a municipal inspection. The work is performed under our Maine electrical license, and every box, splice, and connection is accessible and to code when we leave.

Knob-and-Tube: What It Is and Why Insurers Care

Knob-and-tube wiring was the standard method in the U.S. roughly from the 1880s through the 1940s — individual conductors run through ceramic knobs and tubes, with no ground wire and no sheathing binding the wires together. It was well-engineered for its time, and where it's still in good condition and undisturbed, it isn't automatically dangerous.

The problems show up with age and modification: the rubber-and-cloth insulation dries out and cracks over 70-plus years, and decades of homeowners adding insulation on top of it (which knob-and-tube was never designed to have touching it) or splicing into it without a junction box create real fire risk. It's also why many homeowners insurers in Maine now decline to write or renew a policy on a home with active knob-and-tube circuits, or require it be replaced first.

Aluminum Branch-Circuit Wiring (Roughly 1965–1973)

During a copper shortage in the mid-1960s and early 1970s, a lot of homes were wired with aluminum branch-circuit conductors instead of copper. The wire itself carries current fine — the issue is the connections. Aluminum expands and contracts more than copper with heating and cooling, and older devices weren't rated to handle that, so the connection loosens, oxidizes, and heats up over years of use.

The U.S. Consumer Product Safety Commission's own research on this era of wiring found connections on aluminum branch circuits failed at a dramatically higher rate than the same connections on copper — enough that it's treated as its own inspection category, not a footnote.

What Fixing It Actually Looks Like

  • Copper pigtailing — the aluminum wire is spliced to a short copper pigtail using a connector actually rated for aluminum-to-copper joints (not a standard wire nut), then the copper pigtail lands on the outlet or switch. This is the accepted repair method and far less invasive than a full rewire.
  • Full replacement — for a whole-house knob-and-tube system near the end of its life, or where a remodel already has the walls open, running new copper NM cable throughout is the more permanent fix.
  • Device swaps — outlets and switches rated "CO/ALR" are designed to be connected directly to aluminum wire; older devices without that rating are part of why aluminum wiring earned its reputation.

What This Means for a Panel Upgrade or Remodel

If you're already having us open up a panel or a wall for another reason — a kitchen remodel, a panel upgrade, an addition — it's the cheapest time to deal with either wiring type on that circuit, since the labor to expose it is already being spent. We flag both conditions during any panel or major electrical job rather than waiting for them to become their own emergency.

Sources: U.S. CPSC — Repairing Aluminum Wiring; Maine Office of Professional Licensing — Electricians

The Aces Highlands crew in black uniforms standing in front of an Aces Highlands vanThe Aces Highlands crew in black uniforms standing in front of an Aces Highlands van

Why Choose Aces Highlands for Wiring & Rewiring in Greater Portland

We treat electrical work with the seriousness it deserves — whether it is a single home outlet or a full panel upgrade.

  • Every connection is tight
  • Every circuit is tested
  • Our licensed electricians pull permits and arrange inspections when the work requires them

Safe, clean, and done right.

Wiring & Rewiring FAQ

Increasingly, no. Many insurers in Maine decline coverage or charge steep premiums for homes with active knob-and-tube, and some require replacement before closing on a sale. Rewiring resolves the insurance problem and removes a genuine fire risk at the same time.
Nationally, whole-home rewiring typically runs $4-$10+ per square foot depending on access, home age, and finish level — a partial rewire of only the original circuits costs far less. After walking your home, we quote a firm written price so there are no surprises.
No. We fish new wiring through existing cavities from basements, attics, and small access openings. Some targeted drywall openings are usually necessary, but they are modest and easy to patch — nothing like the gut job people imagine.
Most single-family rewires take several days to a week depending on size and access. We stage the work so you keep power in the rooms you are living in, and we walk you through the schedule before we start.
Sometimes. GFCI protection can add shock protection to ungrounded circuits and is a legitimate, code-recognized improvement. But it does not fix deteriorated insulation or overloaded conductors. We will tell you honestly which situation you have — protection upgrade or genuine rewire.
Aces Highlands crew in front of two Aces Highlands vans

Proudly Serving Greater Portland and Southern Maine

Wiring and rewiring services available in:

• Portland • South Portland • Scarborough • Westbrook • Gorham • Falmouth • Cape Elizabeth • Cumberland • Windham • Standish • Gray • New Gloucester • Raymond • North Yarmouth • Yarmouth • Freeport • Pownal • Bridgton • Brunswick • Harpswell

If you don’t see your area listed, call (207) 670-8616 — chances are we can still help.

Aces Highlands crew in front of two Aces Highlands vans

What Our Customers Are Saying

Trusted by homeowners across the Greater Portland area for quality workmanship, responsive service, and professional care.

Google
4.7
Google rating40 reviews
Write a review
Susan Donegan profile picture
Susan DoneganPosted on Google · July 2026
We have called Samuel for our electrical needs over the last few years and have always been impressed with professional and courteous attitude — installing extra outlets, installing new lights and ceiling fans, our whole house generator, charger for the electric car, even the hot tub!!! His price was fair, and never disappointed when work was completed.
Amanda R profile picture
Amanda RPosted on Google · July 2026
I've had an excellent experience working with them for both electrical and HVAC work as I remodel my 1785 home. I highly recommend them.
Malina Foss profile picture
Malina FossPosted on Google · July 2026
I can not recommend Sam and his team enough!! In a world of slow response times and cut corners they went above and beyond in every area, installing a new electrical panel for me. Their attention to detail and love of their craft truly sets them apart from the rest!
Jacqueline Vogeley profile picture
Jacqueline VogeleyPosted on Google · September 2026
Great experience! Open, honest and efficient Job well done
Ruth Kirkwood profile picture
Ruth KirkwoodPosted on Google · June 2026
This company is excellent. They quickly and efficiently repaired the kitchen faucet that was loose.
Steve Robertson profile picture
Steve RobertsonPosted on Google · June 2026
Where to begin? These guys hooked up a sauna for me and did an amazing job, it was not a small job. Projects big or small, these guys are my go to. Responsive, reasonably priced, and professional. In a world where it is tough to get good service, I'm thrilled to have these guys in my phone.
Ryan Eling profile picture
Ryan ElingPosted on Google
This team was called in by my property management company for where I rent. Elijah and his team were professional, clear speaking. Good communicators gave me the real deal. Didn't give any runaround. I trust them and want to use them for my own projects.
Christian van Loenen profile picture
Christian van LoenenPosted on Google
Beyond impressed with Elijah and his team. Professional, communicative, and do great work. HIGHLY recommend. Thank you, Elijah!
John Walton profile picture
John WaltonPosted on Google
I've had three HVAC issues over the past two years. Each time I call, Elija or the office picks up the phone, and my problem is fixed in 24 hrs. Their solutions always feel correct and honest. I cannot recommend them more.
Adam Ayan profile picture
Adam AyanPosted on Google
Elijah and Highlands Heating & AC were super helpful! Boiler failed over the weekend and Elijah was very responsive and helpful, getting us up and running right away. I would recommend him at HH&AC highly!
Justin Funk profile picture
Justin FunkPosted on Google
We highly recommend Highlands Heating & AC. They are extremely responsive, knowledgeable and do great work. Our boiler stopped working and Elijah was quick to respond after hours on a Friday. He installed a new boiler and heat pump hot water heater.
Nichole A profile picture
Nichole APosted on Google
Highly recommend! Cannot thank them enough for fixing my water heater. Elijah is very reliable and communicative. No hassle, no phone tag, transparent with cost and quick to repair the issue. I know who to call if I need help again!

Need Wiring & Rewiring Today?

Panel upgrades, EV chargers, generators, wiring, and lighting for your home — done safely and to code by a licensed Maine electrician.

Call now to schedule wiring or rewiring: (207) 670-8616

Go to Top