Boiler Repair in Auburn, Maine

Check the thermostat is calling for heat, the emergency switch (usually a red switch at the top of the basement stairs) was not flipped off, the breaker is on, and — for oil systems — that you have fuel in the tank. Press the red reset button on an oil burner no more than once. If none of that restores heat, call us rather than repeatedly hitting reset, which can flood the chamber with oil.

That kettling sound usually means scale buildup on the heat exchanger or air trapped in the system — both fixable, and both worth addressing promptly since kettling stresses the boiler and wastes fuel.

A leak somewhere in the system loop, a failing expansion tank, or a relief valve that is weeping. Small leaks are not always visible — they can hide in a slab or wall — and continually topping off with fresh water accelerates corrosion, so it is worth diagnosing rather than living with.

Treat it as one. A minor fitting drip is often a quick fix, but a leak from the boiler block itself means the heat exchanger has failed. Either way, shut off the water feed if the leak is significant and call — water damage compounds by the hour.

Common repairs like circulator pumps, zone valves, and ignition components typically run from a couple hundred dollars up to around a thousand depending on the part. We diagnose first, quote the exact repair before doing it, and never invoice you for guesswork parts.