Local & independent. Open 24/7

(207) 670-8616Call now · Answered 24/7
Wiring & Rewiring in Turner, Maine by Aces Highlands

Wiring & Rewiring in Turner, Maine

Turner, Androscoggin County

New Circuit Installation · Whole-Home Rewiring · Knob & Tube Replacement

Current offers & financing

See all coupons →
FULL INSTALLATION SERVICES

$500

$500 Off Any Full Install $10K or More

Expires 12/31/2026

WATER HEATER SERVICES

$1,150

$1,150 Instant Discount On Heat Pump Water Heaters!

Expires 12/31/2026

Financing

Financing available

Finance up to 100% of your project with low monthly payments through our lending partners. Quick approval, no prepayment penalty.

Wiring & Rewiring for Turner Homeowners

New Circuit Installation
Whole-Home Rewiring
Knob & Tube Replacement
Yellow NM-B Romex cable with the conductors exposed

For wiring & rewiring in Turner, homeowners turn to Aces Highlands: a Portland-based crew (508 Riverside St Unit 1) that is minutes from Androscoggin County and already familiar with the homes, climate and codes here.

Whether you need a single new circuit or a complete rewire of an older home, Aces Highlands handles residential wiring with precision and code compliance.

Older homes in the Portland area may still have knob-and-tube or aluminum wiring that presents safety risks and insurance issues. We replace outdated wiring with modern copper wiring, properly routed and protected in every wall and ceiling cavity. A rewire often pairs with a panel upgrade for a fully modernized electrical system.

For renovations and additions, we run new circuits, install junction boxes, and ensure proper wire sizing for the intended load. We also handle plumbing and HVAC work for remodel projects, keeping everything under one roof.

Every wiring job includes proper circuit labeling, secure connections, and thorough testing. We pull permits when required and schedule inspections to ensure full code compliance.

Why Turner Calls Aces Highlands

  • Local team minutes from Turner, serving all of Androscoggin County
  • Diagnostics come first, upsells do not — the invoice matches the quote
  • Same-week scheduling for most service calls
  • Fully licensed, fully insured, with a track record of Google reviews from real jobs

Turner Homes and What They Need

Turner's median home was built in 1980, with about 16 percent of housing predating 1940 and 21 percent predating 1960 -- a moderate share of older farmhouses and village housing mixed with later rural infill. Older farmhouses in particular often need a fresh look at wiring that was added piecemeal over the decades.

Power, Storms and Wiring in Turner

Central Maine Power serves Turner's part of Androscoggin County. With every home on a private well, a power outage means no running water as well as no heat, which is exactly the gap a standby generator is meant to close on a rural Turner property.

Electrician inspecting an open panel with a flashlight before rewiring work

Getting to Know Turner

Turner was incorporated back in 1786, taking its current name from the town's first minister, Rev. Charles Turner, in place of the original 1768 land-grant name 'Sylvester-Canada.' It grew up as a farming community known for corn and apples, helped along by water-power sites on the Nezinscot River.

The town today is made up of three villages -- Turner, Turner Center, and North Turner -- and sits within the Lewiston-Auburn metro area even though it has kept its rural, agricultural character. That mix of old farmhouses and newer rural infill is part of what makes Turner's housing stock so varied.

Local & Independent — Not a Franchise

Aces Highlands is a locally owned Portland, Maine company serving Turner — not a national franchise. Nobody on our crew works on commission, so there is no incentive to sell you more than the job needs. We show up, fix the actual problem, and let the work speak for itself.

How Your Electrical Panel Works

  1. Meter — measures the power the utility delivers
  2. Main breaker — the single shutoff for the whole panel
  3. Branch breakers — one per circuit, trip on overload or a fault
  4. Neutral / ground bus — the common return and safety path
  5. Panel capacity — how much headroom is left for new circuits

Homeowner Guide

Old Wiring, Explained: Knob-and-Tube and Aluminum Branch Circuits

Southern Maine has a lot of housing stock old enough to have gone through several wiring eras, and two of them come up constantly on inspection reports: knob-and-tube and aluminum branch-circuit wiring. Neither one means your house is unsafe today, but both mean something specific, and homeowners deserve the real explanation instead of a scare pitch.

Read the Full Guide

More Electrical Services

Wiring & Rewiring is part of our full electrical services lineup. Explore the details or browse everything we offer in Turner.

Wiring & Rewiring DetailsAll Services in Turner

Service Info

Service Area

Turner, Androscoggin County, ME

Hours

Open 24 hours, 7 days a week

Codes & Permits for Wiring & Rewiring in Turner

Electrical work in Turner is licensed and permitted under Maine's Electricians' Examining Board, which adopted the 2026 National Electrical Code effective July 1, 2026. Turner's Code Enforcement page names Ross W. Gagne as the town's contact specifically for building and plumbing permits, without listing electrical among the CEO's responsibilities; this is consistent with Turner defaulting to the State Electrical Inspector program under Maine's Office of Professional and Occupational Regulation (OPOR) / Electricians' Examining Board rather than a town-designated Local Electrical Inspector. The town was historically an agricultural community producing corn and apples, with water-power sites on the Nezinscot River; it includes the villages of Turner, Turner Center, and North Turner.

  • CPSC recognizes three permanent repair methods for aluminum branch-circuit wiring: (1) complete rewiring with copper, (2) the COPALUM crimp connection system, and (3) an approved 'alternative repair method' using a listed connector such as an AlumiConn connector to pigtail a short length of copper wire onto the existing aluminum conductor. CPSC does not list simply swapping in CO/ALR-rated devices as one of its three approved permanent repairs, and does not endorse do-it-yourself repair. cpsc.gov
  • Any work extending, altering, or replacing existing wiring — including older knob-and-tube or aluminum branch-circuit wiring found in Maine's older housing stock — must be performed by a Maine-licensed electrician and brought up to the currently adopted 2026 NEC for the portion of the system being worked on. maine.gov
  • Rewiring beyond the state's 'minor repair work' exemption (which covers only replacing existing switches, sockets, lamps, fuses, and repairing entrance-service equipment) requires a standard electrical permit. maine.gov
  • The Electricians' Examining Board's own notice confirms the same adoption: 'The Maine Electricians' Examining Board has adopted a new Chapter 120, Electrical Installation Standards, incorporating the 2026 NEC by reference... All installations of electrical equipment commencing on or after July 1, 2026 must comply with the NFPA standard 70, National Electrical Code (2026 edition).' maine.gov

How Aces Highlands Handles Wiring & Rewiring in Turner

  • With 16% of housing in Turner built before 1940, we regularly find knob-and-tube or aluminum wiring on a rewiring job; the section we touch gets rebuilt to today's code, full stop.
  • Swapping a switch or outlet for an identical one is exempt "minor repair work" under Maine law; extending or adding circuits is not, and gets its own permit before we start.
  • We label circuits as we go and bring anything new up to the 2026 National Electrical Code, Maine's current standard.
Turner, ME
The town office building on Turner Center Road, serving as Turner's municipal seat.
Street View © Google

Why homeowners choose Aces Highlands

  • We show up when we say

    We show up on time, as promised, and complete the work with clean professionalism.

  • Pricing upfront, before work starts

    Honest diagnostics and a clear price before any work begins — no surprises on the invoice.

  • Done right the first time

    HVAC, plumbing and electrical done right the first time — backed by our workmanship guarantee and 100% satisfaction guarantee.

Locally owned in Portland, Maine · Serving Greater Portland and Southern Maine since 2019

Google reviews

What Electrical customers say

  • Susan Donegan

    3 months ago

    We have called Samuel for our electrical needs over the last few years and have always been impressed with professional and courteous attitude — installing extra outlets, installing new lights and ceiling fans, our whole house generator, charger for the electric car, even the hot tub!!! His price was fair, and never disappointed when work was completed.

  • Amanda R

    2 months ago

    I've had an excellent experience working with them for both electrical and HVAC work as I remodel my 1785 home. I highly recommend them.

  • Malina Foss

    3 months ago

    I can not recommend Sam and his team enough!! In a world of slow response times and cut corners they went above and beyond in every area, installing a new electrical panel for me. Their attention to detail and love of their craft truly sets them apart from the rest!

  • John Walton

    5 months ago

    I've had three HVAC issues over the past two years. Each time I call, Elija or the office picks up the phone, and my problem is fixed in 24 hrs. Their solutions always feel correct and honest. I cannot recommend them more.

  • Adam Ayan

    10 months ago

    Elijah and Highlands Heating & AC were super helpful! Boiler failed over the weekend and Elijah was very responsive and helpful, getting us up and running right away. I would recommend him at HH&AC highly!

  • Justin Funk

    a year ago

    We highly recommend Highlands Heating & AC. They are extremely responsive, knowledgeable and do great work. Our boiler stopped working and Elijah was quick to respond after hours on a Friday. He installed a new boiler and heat pump hot water heater.

Wiring & Rewiring FAQs

Will my insurance company cover a home with knob-and-tube wiring?

Increasingly, no. Many insurers in Maine decline coverage or charge steep premiums for homes with active knob-and-tube, and some require replacement before closing on a sale. Rewiring resolves the insurance problem and removes a genuine fire risk at the same time.

How much does it cost to rewire a house?

Nationally, whole-home rewiring typically runs $4-$10+ per square foot depending on access, home age, and finish level — a partial rewire of only the original circuits costs far less. After walking your home, we quote a firm written price so there are no surprises.

Do you have to open up all my walls to rewire?

No. We fish new wiring through existing cavities from basements, attics, and small access openings. Some targeted drywall openings are usually necessary, but they are modest and easy to patch — nothing like the gut job people imagine.

How long does a whole-home rewire take?

Most single-family rewires take several days to a week depending on size and access. We stage the work so you keep power in the rooms you are living in, and we walk you through the schedule before we start.

Can I just add GFCI outlets instead of rewiring?

Sometimes. GFCI protection can add shock protection to ungrounded circuits and is a legitimate, code-recognized improvement. But it does not fix deteriorated insulation or overloaded conductors. We will tell you honestly which situation you have — protection upgrade or genuine rewire.

Need Wiring & Rewiring in Turner?

Call our Turner team or get a free quote. We will get you scheduled and take care of it right the first time.

More Ways We Can Help

Google Reviews

Get a Quote in Turner

Request Service

Fill out the form below to request an estimate or schedule service.

“*” indicates required fields

Need it today?Call (207) 670-8616

CallGet A Quote